Hardy Frame®  HFX-Series Template Kit (HFXTK)

template kits

Hold Down Anchor Assemblies:

  • 1-1/8 STD = 1-1/8 x 32" ASTM F1554 Grade-36 all thread with (3) Standard Hex Nuts.
  • 1-1/8 HS = 1-1/8 x 38" ASTM A193 Grade-B7 all thread with (1) 1/2x3x3 ASTM A36 Plate Washer & (3) Standard Hex Nuts
  • 7/8 STD = 7/8 x 30" ASTM F1554 Grade-36 all thread with (1) 1/2x3x3 ASTM A36 Plate Washer & (3) Standard Hex Nuts
  • 7/8 HS = 7/8 x 31" ASTM A193 Grade-B7 all thread with (1) 1/2x3x3 ASTM A36 Plate Washer & (3) Standard Hex Nuts
  • For other rod lengths contact Hardy Frames

    1. All Thread length = length of embed (le) + 12” (formboard) + 6”(Kit assembly + height above concrete) For Raised Floor installations adjust the all thread length or extend length with a Grade 8 Coupling nut
    2. The Hardened Round Washers for connecting the Panel base may be substituted with two SAE or two Round-Flat Washers
    3. STD assemblies require a Hardy Frame® Bolt Brace (Minimum) double nutted at the embed end or 1/2x3x3 ASTM A36 Plate Washer
    4. HS assemblies require 1/2x3x3 ASTM A36 Plate Washer (Minimum) and the Hardy Frame® Bolt Brace is optional
    5. HS all thread rods provided by Hardy Frames, Inc. are stamped on both ends


Save